How to Enable the Streaming Client Debug Console

Note: The following procedure must be completed on the server if “Streaming to Server” is required and on the workstation if “Streaming to Client” is required.

Caution! Refer to the Disclaimer at the end of this article before using Registry Editor.

To enable the Streaming Client Debug Console on a 32-bit device

Make the following changes to the registry on the machine that is running the Streaming Client:

Under HKEY_LOCAL_MACHINE/Software/Citrix/Rade/

ADD DWORD “EnableDebugConsole”

ADD Value =1

To enable the Streaming Client Debug Console on a 64-bit device

Make the following changes to the registry on the machine that is running the Streaming Client:

Under HKEY_LOCAL_MACHINE/Software/Wow6432/Citrix/Rade/

ADD DWORD “EnableDebugConsole”

ADD Value =1

Note: The Streaming Client Debug Console sends the real-time information to the command prompt and not to a text file.

To save the data

  1. Use the MARK/COPY/PASTE options. Use MARK, then select ALL, and then COPY.

  2. Paste the text into Notepad.

Note: For large applications, it might be necessary to increase the buffer in the command prompt before running the Streaming Client Debug console (edit the properties of the command prompt).

To disable the Streaming Client Debug Console

To disable the debugger, change the EnableDebugConsole value from 1 to 0.

Related:

  • No Related Posts

Leave a Reply