7019836: Should I Live Connect or Cache Connect?

This document (7019836) is provided subject to the disclaimer at the end of this document.

Environment

Vertigo (all builds)

Situation

Should I connect live or through a cache when I first boot up Vertigo?

Resolution

Discuss the differences between live and cache mode.1) When you install vertigo for the very first time, you are going to need to connect in LIVE mode. The product will pull all of the information for every user in your system. If you have a small system, then it shouldn’t take very long – but this process might take a while for larger systems.2) If you would like to skip this process in the future, you will connect via cache mode. Connecting in cache mode will only pull all of the information that has changed since Vertigo was last opened. This will cut the importing time drastically, especially for admins in larger GroupWise systems

Additional Information

This article was originally published in the GWAVA knowledgebase as article ID 1014.

Disclaimer

This Support Knowledgebase provides a valuable tool for NetIQ/Novell/SUSE customers and parties interested in our products and solutions to acquire information, ideas and learn from one another. Materials are provided for informational, personal or non-commercial use within your organization and are presented “AS IS” WITHOUT WARRANTY OF ANY KIND.

Related:

Leave a Reply