The DNS server is bound to a large number of IP addresses. Each of these server IP addresses consumes additional system resources and can add a slight increase in performance overhead for DNS query reception. In most cases, you can remove secondary IP addresses that are not required to support server networking hardware. For more information, see “Configuring multihomed servers” in the online Help.

Details
Product:	Windows Operating System
Event ID:	412
Source:	DNS
Version:	5.0
Symbolic Name:	DNS_EVENT_MANY_IP_INTERFACES
Message:	The DNS server is bound to a large number of IP addresses. Each of these server IP addresses consumes additional system resources and can add a slight increase in performance overhead for DNS query reception. In most cases, you can remove secondary IP addresses that are not required to support server networking hardware. For more information, see “Configuring multihomed servers” in the online Help.

User Action
To verify and reset the IP addresses on which the DNS server should listen: 1. In DNS Manager, right-click the DNS server in the server list. 2. Click Properties. 3. On the Interface tab, use Add and Remove to edit the list of IP addresses. Use Move Up and Move Down to prioritize the list of IP addresses. 4. When you are finished, click OK.

Process (PID=). Error ERROR_TIMEOUT (0x) occurred when DNS was queried for the service location (SRV) resource record used to locate a domain controller for domain The query was for the SRV record for The DNS servers used by this computer for name resolution are not responding. This computer is configured to use DNS servers with the following IP addresses:Verify that this computer is connected to the network, that these are the correct DNS server IP addresses, and that at least one of the DNS servers is running.For information about correcting this problem,
Process %1 (PID=%2). Error ERROR_TIMEOUT (0x%3) occurred when DNS was queried for the service location (SRV) resource record used to locate a domain controller for domain %4 The query was for the SRV record for %5. The DNS servers used by this computer for name resolution are not responding. This computer is configured to use DNS servers with the following IP addresses:%6. Verify that this computer is connected to the network, that these are the correct DNS server IP addresses, and that at least one of the DNS servers is running. For information about correcting this problem, %7%8
The DNS server will send requests to other DNS servers on a port other than its default port (TCP port 53). This is done to accommodate configuration changes you have made at the DNS server and prevent it from failing to receive DNS queries it makes to other servers. You might want to change this behavior. For more information, see “DNS server log reference” in the online Help. This DNS server is multi-homed (running on multiple IP addresses), but has been configured NOT to run on ALL IP addresses available on the machine. Under these conditions it is impossible to guarantee that a DNS query to a remote DNS server will be sent with one the IP addresses the DNS server is using, and hence, whether the response to that IP address, will be received on the DNS port. To avoid this problem, sends to other DNS servers will be done on a arbitrary (non-DNS) port, and the response will be received regardless of the IP address used. If you wish to use the DNS port for sends to other DNS servers, then you must change your configuration to either: 1) use all IP addresses on the machine for DNS (i.e. eliminate the listen address list) or 2) limit the DNS server to use a single IP address.
The DNS server has detected that the secondary zone %1 has no master IP addresses in registry data. Secondary zones require at least one master server to act as a source. You can add or update the IP address for the master server for this zone using the DNS console. For more information, see “To update the master server for a secondary zone” in the online Help.
Event ID 11166 — DNS Client Registration

Related:

Leave a Reply Cancel reply

Links