Cisco IOS XR Software Standby Route Processor Gigabit Ethernet Management Interface Access Control List Bypass Vulnerability

A vulnerability in the access control list (ACL) functionality of the standby route processor management interface of Cisco IOS XR Software could allow an unauthenticated, remote attacker to reach the configured IP addresses on the standby route processor management Gigabit Ethernet Management interface.

The vulnerability is due to a logic error that was introduced in the Cisco IOS XR Software, which prevents the ACL from working when applied against the standby route processor management interface. An attacker could exploit this vulnerability by attempting to access the device through the standby route processor management interface.

There are no workarounds that address this vulnerability.

This advisory is available at the following link:
https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-xracl-zbWSWREt

Security Impact Rating: Medium

CVE: CVE-2020-3364

Related:

Cisco IOS XE SD-WAN Software Authentication Bypass Vulnerability

A vulnerability in Cisco IOS XE SD-WAN Software could allow an unauthenticated, physical attacker to bypass authentication and gain unrestricted access to the root shell of an affected device.

The vulnerability exists because the affected software has insufficient authentication mechanisms for certain commands. An attacker could exploit this vulnerability by stopping the boot initialization of an affected device. A successful exploit could allow the attacker to bypass authentication and gain unrestricted access to the root shell of the affected device.

Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

This advisory is available at the following link:
https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-auth-b-NzwhJHH7

Security Impact Rating: Medium

CVE: CVE-2020-3216

Related:

  • No Related Posts

Cisco IOx Application Environment for IOS Software for Cisco Industrial Routers Vulnerabilities

Multiple vulnerabilities in the Cisco IOx application environment of Cisco 809 and 829 Industrial Integrated Services Routers (Industrial ISRs) and Cisco 1000 Series Connected Grid Routers (CGR1000) that are running Cisco IOS Software could allow an attacker to cause a denial of service (DoS) condition or execute arbitrary code with elevated privileges on an affected device.

For more information about these vulnerabilities, see the Details section of this advisory.

Cisco has released software updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities.

This advisory is available at the following link:
https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ios-iot-gos-vuln-s9qS8kYL

This advisory is part of the June 3, 2020, release of the Cisco IOS and IOS XE Software Security Advisory Bundled Publication, which includes 23 Cisco Security Advisories that describe 25 vulnerabilities. For a complete list of the advisories and links to them, see Cisco Event Response: June 2020 Semiannual Cisco IOS and IOS XE Software Security Advisory Bundled Publication.

Security Impact Rating: High

CVE: CVE-2020-3199,CVE-2020-3257

Related:

  • No Related Posts

Cisco IOS XE Software Flexible NetFlow Version 9 Denial of Service Vulnerability

A vulnerability in the Flexible NetFlow Version 9 packet processor of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.

The vulnerability is due to improper validation of parameters in a Flexible NetFlow Version 9 record. An attacker could exploit this vulnerability by sending a malformed Flexible NetFlow Version 9 packet to the Control and Provisioning of Wireless Access Points (CAPWAP) data port of an affected device. An exploit could allow the attacker to trigger an infinite loop, resulting in a process crash that would cause a reload of the device.

Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

This advisory is available at the following link:
https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-iosxe-fnfv9-dos-HND6Fc9u

This advisory is part of the June 3, 2020, release of the Cisco IOS and IOS XE Software Security Advisory Bundled Publication, which includes 23 Cisco Security Advisories that describe 25 vulnerabilities. For a complete list of the advisories and links to them, see Cisco Event Response: June 2020 Semiannual Cisco IOS and IOS XE Software Security Advisory Bundled Publication.

Security Impact Rating: High

CVE: CVE-2020-3221

Related:

Cisco IOS and IOS XE Software Simple Network Management Protocol Denial of Service Vulnerability

A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS Software and Cisco IOS XE Software on Catalyst 4500 Series Switches could allow an authenticated, remote attacker to cause a denial of service (DoS) condition.

The vulnerability is due to insufficient input validation when the software processes specific SNMP object identifiers. An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.

Note: To exploit this vulnerability by using SNMPv2c or earlier, the attacker must know the SNMP read-only community string for an affected system. To exploit this vulnerability by using SNMPv3, the attacker must know the user credentials for the affected system.

Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

This advisory is available at the following link:
https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-snmp-dos-USxSyTk5

This advisory is part of the June 3, 2020, release of the Cisco IOS and IOS XE Software Security Advisory Bundled Publication, which includes 23 Cisco Security Advisories that describe 25 vulnerabilities. For a complete list of the advisories and links to them, see Cisco Event Response: June 2020 Semiannual Cisco IOS and IOS XE Software Security Advisory Bundled Publication.

Security Impact Rating: High

CVE: CVE-2020-3235

Related:

Cisco IOS XE Software Web UI Unauthenticated Proxy Service Vulnerability

A vulnerability in the web-based user interface (web UI) of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to bypass access control restrictions on an affected device.

The vulnerability is due to the presence of a proxy service at a specific endpoint of the web UI. An attacker could exploit this vulnerability by connecting to the proxy service. An exploit could allow the attacker to bypass access restrictions on the network by proxying their access request through the management network of the affected device. As the proxy is reached over the management virtual routing and forwarding (VRF), this could reduce the effectiveness of the bypass.

Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

This advisory is available at the following link:
https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-webui-unauthprxy-KXXsbWh

Security Impact Rating: Medium

CVE: CVE-2020-3222

Related:

Cisco IOS and IOS XE Software Internet Key Exchange Version 2 Denial of Service Vulnerability

A vulnerability in the Internet Key Exchange Version 2 (IKEv2) implementation in Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to prevent IKEv2 from establishing new security associations.

The vulnerability is due to incorrect handling of crafted IKEv2 SA-Init packets. An attacker could exploit this vulnerability by sending crafted IKEv2 SA-Init packets to the affected device. An exploit could allow the attacker to cause the affected device to reach the maximum incoming negotiation limits and prevent further IKEv2 security associations from being formed.

Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

This advisory is available at the following link:
https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ikev2-9p23Jj2a

This advisory is part of the June 3, 2020, release of the Cisco IOS and IOS XE Software Security Advisory Bundled Publication, which includes 23 Cisco Security Advisories that describe 25 vulnerabilities. For a complete list of the advisories and links to them, see Cisco Event Response: June 2020 Semiannual Cisco IOS and IOS XE Software Security Advisory Bundled Publication.

Security Impact Rating: High

CVE: CVE-2020-3230

Related:

Cisco IOS XE Software Catalyst 9800 Series Wireless Controllers Denial of Service Vulnerability

A vulnerability in the locally significant certificate (LSC) provisioning feature of Cisco Catalyst 9800 Series Wireless Controllers that are running Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a memory leak that could lead to a denial of service (DoS) condition.

The vulnerability is due to incorrect processing of certain public key infrastructure (PKI) packets. An attacker could exploit this vulnerability by sending crafted Secure Sockets Layer (SSL) packets to an affected device. A successful exploit could cause an affected device to continuously consume memory, which could result in a memory allocation failure that leads to a crash and causes a DoS condition.

Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

This advisory is available at the following link:
https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-iosxe-ewlc-dos-TkuPVmZN

This advisory is part of the June 3, 2020, release of the Cisco IOS and IOS XE Software Security Advisory Bundled Publication, which includes 23 Cisco Security Advisories that describe 25 vulnerabilities. For a complete list of the advisories and links to them, see Cisco Event Response: June 2020 Semiannual Cisco IOS and IOS XE Software Security Advisory Bundled Publication.

Security Impact Rating: High

CVE: CVE-2020-3203

Related:

Cisco IOS and IOS XE Software Common Industrial Protocol Denial of Service Vulnerabilities

Multiple vulnerabilities in the implementation of the Common Industrial Protocol (CIP) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition.

The vulnerabilities are due to insufficient input processing of CIP traffic. An attacker could exploit these vulnerabilities by sending crafted CIP traffic to be processed by an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.

Cisco has released software updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities.

This advisory is available at the following link:
https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-cipdos-hkfTZXEx

This advisory is part of the June 3, 2020, release of the Cisco IOS and IOS XE Software Security Advisory Bundled Publication, which includes 23 Cisco Security Advisories that describe 25 vulnerabilities. For a complete list of the advisories and links to them, see Cisco Event Response: June 2020 Semiannual Cisco IOS and IOS XE Software Security Advisory Bundled Publication.

Security Impact Rating: High

CVE: CVE-2020-3225

Related:

Cisco IOS XE Software Web UI Arbitrary File Read Vulnerability

A vulnerability in the web-based user interface (web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker with administrative privileges to read arbitrary files on the underlying filesystem of the device.

The vulnerability is due to insufficient file scope limiting. An attacker could exploit this vulnerability by creating a specific file reference on the filesystem and then accessing it through the web UI. An exploit could allow the attacker to read arbitrary files from the underlying operating system’s filesystem.

Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

This advisory is available at the following link:
https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-webui-filerd-HngnDYGk

Security Impact Rating: Medium

CVE: CVE-2020-3223

Related:

  • No Related Posts