How to change “Default Paper Size” while using Citrix universal printer

To change the default settings for the Citrix Generic Universal Printer by overriding the hard-coded default settings of the Citrix Generic Universal Printer, we use the following registry entry:

Use the following registry values to override the default settings with Citrix Universal Printer :

HKEY_LOCAL_MACHINESOFTWARECitrixPrintUPDDevmode

Name: Refer the table mentioned in CTX113148

Type: REG_DWORD

Data: Refer the table mentioned in CTX113148

But if we want to set Paper Size to a specific size using “EMF” and “XPS” ,those registry keys differ.

And to make it work with both “EMF” and “XPS” ,we need to apply both these registry entries :

UPDDevmode Reg

For Example to set a “PaperSize – A4” ,we will see the following behavior using “EMF” and “XPS” driver preference set in policy.

PaperSize

With “EMF” :

  • If we set dmPaperSize (9 = A4) in register key /Citrix/Print/UPDDevmode ,the dmPaperSize value will nothelp us in changing the value in Citrix Universal Printer’s properties.
  • However if we use dmFormname (A4) in the register key /Citrix/Print/UPDDevmode , dmFormname value will help us in changing the value in Citrix Universal Printer’s properties.

Similarly

With “XPS”:

  • If we set dmPaperSize (9 = A4) in register key /Citrix/Print/UPDDevmode ,the dmPaperSize valuewill help us in changing the value in Citrix Universal Printer’s properties.
  • However if we use dmFormname (A4) in the register key /Citrix/Print/UPDDevmode , dmFormname value will nothelp us in changing the value in Citrix Universal Printer’s properties.

Note:-

  • We always pick up the devmode settings from the remote printer. If the remote/client endpoint sets it to be “Letter”, it will be letter, even if registry says “A4”.
  • The registry override is only for Citrix Universal Printer, which is not linked to any specific printer defined on the Client endpoint.
  • For all the other printers, it will pick up the client devmode settings. Refer to CTX106812

Related:

  • No Related Posts

How to change “Default Paper Size” while using Citrix universal printer

To change the default settings for the Citrix Generic Universal Printer by overriding the hard-coded default settings of the Citrix Generic Universal Printer, we use the following registry entry:

Use the following registry values to override the default settings with Citrix Universal Printer :

HKEY_LOCAL_MACHINESOFTWARECitrixPrintUPDDevmode

Name: Refer the table mentioned in CTX113148

Type: REG_DWORD

Data: Refer the table mentioned in CTX113148

But if we want to set Paper Size to a specific size using “EMF” and “XPS” ,those registry keys differ.

And to make it work with both “EMF” and “XPS” ,we need to apply both these registry entries :

UPDDevmode Reg

For Example to set a “PaperSize – A4” ,we will see the following behavior using “EMF” and “XPS” driver preference set in policy.

PaperSize

With “EMF” :

  • If we set dmPaperSize (9 = A4) in register key /Citrix/Print/UPDDevmode ,the dmPaperSize value will nothelp us in changing the value in Citrix Universal Printer’s properties.
  • However if we use dmFormname (A4) in the register key /Citrix/Print/UPDDevmode , dmFormname value will help us in changing the value in Citrix Universal Printer’s properties.

Similarly

With “XPS”:

  • If we set dmPaperSize (9 = A4) in register key /Citrix/Print/UPDDevmode ,the dmPaperSize valuewill help us in changing the value in Citrix Universal Printer’s properties.
  • However if we use dmFormname (A4) in the register key /Citrix/Print/UPDDevmode , dmFormname value will nothelp us in changing the value in Citrix Universal Printer’s properties.

Note:-

  • We always pick up the devmode settings from the remote printer. If the remote/client endpoint sets it to be “Letter”, it will be letter, even if registry says “A4”.
  • The registry override is only for Citrix Universal Printer, which is not linked to any specific printer defined on the Client endpoint.
  • For all the other printers, it will pick up the client devmode settings. Refer to CTX106812

Related:

  • No Related Posts

When Launching Published Applications via Citrix Storefront Receiving Error “Cannot connect to server, Please check your network and try again.”

This article is intended for Citrix administrators and technical teams only.

Non-admin users must contact their company’s Help Desk/IT support team and can refer to CTX297149 for more information.

After Storefront branding customization, users that are accessing applications from the receiver are getting error “Cannot Connect to Server: Please check your network and try again”

Related:

  • No Related Posts

When Launching Published Applications via Citrix Storefront Receiving Error “Cannot connect to server, Please check your network and try again.”

This article is intended for Citrix administrators and technical teams only.

Non-admin users must contact their company’s Help Desk/IT support team and can refer to CTX297149 for more information.

After Storefront branding customization, users that are accessing applications from the receiver are getting error “Cannot Connect to Server: Please check your network and try again”

Related:

  • No Related Posts

When Launching Published Applications via Citrix Storefront Receiving Error “Cannot connect to server, Please check your network and try again.”

This article is intended for Citrix administrators and technical teams only.

Non-admin users must contact their company’s Help Desk/IT support team and can refer to CTX297149 for more information.

After Storefront branding customization, users that are accessing applications from the receiver are getting error “Cannot Connect to Server: Please check your network and try again”

Related:

  • No Related Posts

Receiver Prompts For Password First Time

This article is intended for Citrix administrators and technical teams only.



Non-admin users must contact their company’s Help Desk/IT support team and can refer to CTX297149 for more information.


Receiver 4.4 installed on a non domain computer. SSON is available in CSGW and works with domain computers. When starting the application the first time you are prompted for username and password. If you click Cancel and start the application again you automatically logged in. I have tried to install with sson, added registry values to save password and sites but still the problem remains.

Related:

  • No Related Posts

Error: “Unable To Open The URL 'file:///System/Library' ” While Launching Published Content with Receiver for Mac

This article is intended for Citrix administrators and technical teams only.



Non-admin users must contact their company’s Help Desk/IT support team and can refer to CTX297149 for more information.

Published content containing non-HTTP(S) URLs cannot be launched. The following error message is displayed:

User-added image

Related:

  • No Related Posts

“This account is already added. Please select another account to add or press the close button” While Configuring Receiver

This article is intended for Citrix administrators and technical teams only.

Non-admin users must contact their company’s Help Desk/IT support team and can refer to CTX297149 for more information.

When customer attempts to configure Receiver, he gets an error:

  • This account is already added. Please select another account to add or press the close button.

Related:

  • No Related Posts

“This account is already added. Please select another account to add or press the close button” While Configuring Receiver

This article is intended for Citrix administrators and technical teams only.

Non-admin users must contact their company’s Help Desk/IT support team and can refer to CTX297149 for more information.

When customer attempts to configure Receiver, he gets an error:

  • This account is already added. Please select another account to add or press the close button.

Related:

  • No Related Posts