Event ID 9010 — TCP/IP Configuration

Event ID 9010 — TCP/IP Configuration

Updated: January 7, 2009

Applies To: Windows Server 2008 R2

TCP/IP configuration encompasses network settings, default gateway, and IP address (static or dynamic).

 

 

Event Details

Product: Windows Operating System
ID: 9010
Source: tcpip
Version: 6.1
Symbolic Name: EVENT_TRANSPORT_TOO_MANY_LINKS
Message: %2 could not create a link to a remote computer. Your computer has exceeded the number of connections it can make to that remote computer.

Resolve
Reduce load on the remote computer

If the connection to the remote computer cannot be established because of connection limit has been exceeded, wait for connections on the remote computer to close before establishing new ones.

Verify

To perform this procedure, you must have membership in Administrators, or you must have been delegated the appropriate authority.

To verify that the an IP address is assigned:

  1. Click Start, click Run, type cmd, and then press ENTER.
  2. Type ipconfig /all to view the IP address configuration of the server.
  3. Examine the output of the ipconfig command. If there is no IP address listed, then the server has not been assigned a static IP address.

Related Management Information

TCP/IP Configuration

Networking

Related:

Event ID 9003 — TCP/IP Configuration

Event ID 9003 — TCP/IP Configuration

Updated: January 7, 2009

Applies To: Windows Server 2008 R2

TCP/IP configuration encompasses network settings, default gateway, and IP address (static or dynamic).

 

 

Event Details

Product: Windows Operating System
ID: 9003
Source: tcpip
Version: 6.1
Symbolic Name: EVENT_TRANSPORT_RESOURCE_SPECIFIC
Message: %2 could not allocate a resource of type %3 due to a specifically configured limit of %4.

Resolve
Initialize TCP/IP

Refresh the protocol configuration on the network interface by disabling it and then enabling it again.

To perform this procedure, you must have membership in Administrators, or you must have been delegated the appropriate authority.

To disable and then re-enable the network interface:

  1. Click Control Panel, double-click Network and Sharing Center, and then click Manage network connections.
  2. Right-click the network interface you want to disable, and then click Disable.
  3. Right-click the network interface again, and then click Enable.

Verify

To perform this procedure, you must have membership in Administrators, or you must have been delegated the appropriate authority.

To verify that the an IP address is assigned:

  1. Click Start, click Run, type cmd, and then press ENTER.
  2. Type ipconfig /all to view the IP address configuration of the server.
  3. Examine the output of the ipconfig command. If there is no IP address listed, then the server has not been assigned a static IP address.

Related Management Information

TCP/IP Configuration

Networking

Related:

Event ID 9002 — TCP/IP Network Connectivity

Event ID 9002 — TCP/IP Network Connectivity

Updated: January 7, 2009

Applies To: Windows Server 2008 R2

Network connectivity allows your computer to communicate with other hosts on your network and the Internet. Connectivity might be full (Internet and intranet), partial (local subnet only), or non-existent.

Event Details

Product: Windows Operating System
ID: 9002
Source: tcpip
Version: 6.1
Symbolic Name: EVENT_TRANSPORT_RESOURCE_LIMIT
Message: %2 could not allocate a resource of type %3 due to its configured size of %4.

Resolve
Initialize TCP/IP

Refresh the protocol configuration on the network interface by disabling it and then enabling it again.

To perform this procedure, you must have membership in Administrators, or you must have been delegated the appropriate authority.

To disable and then re-enable the network interface:

  1. Click Control Panel, double-click Network and Sharing Center, and then click Manage network connections.
  2. Right-click the network interface you want to disable, and then click Disable.
  3. Right-click the network interface again, and then click Enable.

Verify

To perform this procedure, you must have membership in Administrators, or you must have been delegated the appropriate authority.

To verify TCP/IP connectivity:

  1. Click Start, point to All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator.
  2. Click Continue when prompted by User Account Control, and then provide the administrator password, if requested.
  3. Type ping followed by an IP address of another host on the network.
  4. If the ping command succeeds, connectivity is established.

Note:   Windows Firewall might prevent a succesful ping operation. You might need to configure a port exception for the ping to succeed.

Related Management Information

TCP/IP Network Connectivity

Networking

Related:

Event ID 8704 — Virtual Desktop Management

Event ID 8704 — Virtual Desktop Management

Published: January 8, 2010

Applies To: Windows Server 2008 R2

Virtual desktops assigned as personal virtual desktops or assigned to virtual desktop pools are managed by using Hyper-V Manager.

Event Details

Product: Windows Operating System
ID: 8704
Source: Microsoft-Windows-TerminalServices-TSV-VmHostAgent
Version: 6.1
Symbolic Name: EVENT_WARN_IDLE_TIMER_NOT_SET
Message: SaveDelay is set to %1 msec, but idle timer will not be set since VM was originally started outside of TSV. VM=%2

Resolve
Save virtual machine manually

To resolve this issue, you must save the virtual machine manually.

To perform this procedure, you must be a member of the Administrators group, or you must have been delegated the appropriate authority.

To save the virtual machine manually:

  1. On the RD Virtualization Host server, open Hyper-V Manager. To open Hyper-V Manager, click Start, point to Administrative Tools, and then click Hyper-V Manager.
  2. In the left hand pane, click the name of the RD Virtualization Host server.
  3. Under Virtual Machines, right-click the name of the virtual machine to manually save, and then click Save.

 

Verify

To verify that the virtual desktops are configured correctly, you can connect to them by using RD Web Access.

To perform this procedure, you must be a member of the Administrators group, or you must have been delegated the appropriate authority.

To connect to a virtual desktop:

  1. On a client computer, open Internet Explorer. To open Internet Explorer, click Start, point to All Programs, and then click Internet Explorer.
  2. In the Address bar, type https://servername/RDWeb where servername is the fully qualified domain name of the RD Web Access server, and then press ENTER.
  3. In the Domain\user name box, type the name of a user account that has access to a virtual desktop.
  4. In the Password box, type the specified password, and then click Sign in.
  5. Click the appropriate virtual desktop, and then click Connect.
  6. Verify that the virtual desktop opens without error.

Related Management Information

Virtual Desktop Management

Remote Desktop Services

Related:

Event ID 8456 — Virtual Desktop Management

Event ID 8456 — Virtual Desktop Management

Published: January 8, 2010

Applies To: Windows Server 2008 R2

Virtual desktops assigned as personal virtual desktops or assigned to virtual desktop pools are managed by using Hyper-V Manager.

Event Details

Product: Windows Operating System
ID: 8456
Source: Microsoft-Windows-TerminalServices-TSV-VmHostAgent
Version: 6.1
Symbolic Name: EVENT_INFO_TAKE_SNAPSHOT
Message: Snapshot (id=%2) for VM=%1 is taken.

Resolve

This is a normal condition. No further action is required.

Related Management Information

Virtual Desktop Management

Remote Desktop Services

Related:

Event ID 8455 — Startup Management

Event ID 8455 — Startup Management

Published: January 8, 2010

Applies To: Windows Server 2008 R2

The RD Connection Broker server communicates with the RD Virtualization Host server when a user requests a connection to a virtual desktop.

Event Details

Product: Windows Operating System
ID: 8455
Source: Microsoft-Windows-TerminalServices-TSV-VmHostAgent
Version: 6.1
Symbolic Name: EVENT_INFO_TARGET_TYPE_CHANGED
Message: Target type changed from %1 to %2. VM=%3

Resolve

This is a normal condition. No further action is required.

Related Management Information

Startup Management

Remote Desktop Services

Related:

Event ID 8454 — Startup Management

Event ID 8454 — Startup Management

Published: January 8, 2010

Applies To: Windows Server 2008 R2

The RD Connection Broker server communicates with the RD Virtualization Host server when a user requests a connection to a virtual desktop.

Event Details

Product: Windows Operating System
ID: 8454
Source: Microsoft-Windows-TerminalServices-TSV-VmHostAgent
Version: 6.1
Symbolic Name: EVENT_INFO_IDLE_TIMER_CANCELED
Message: Idle timer is canceled. Number of active sessions is %1. VM=%2

Resolve

This is a normal condition. No further action is required.

Related Management Information

Startup Management

Remote Desktop Services

Related:

Event ID 8452 — Startup Management

Event ID 8452 — Startup Management

Published: January 8, 2010

Applies To: Windows Server 2008 R2

The RD Connection Broker server communicates with the RD Virtualization Host server when a user requests a connection to a virtual desktop.

Event Details

Product: Windows Operating System
ID: 8452
Source: Microsoft-Windows-TerminalServices-TSV-VmHostAgent
Version: 6.1
Symbolic Name: EVENT_INFO_DISCONNECTED_FROM_SB
Message: Disconnected from RD Connection Broker. Address=%1

Resolve

This is a normal condition. No further action is required.

Related Management Information

Startup Management

Remote Desktop Services

Related:

Event ID 8451 — Startup Management

Event ID 8451 — Startup Management

Published: January 8, 2010

Applies To: Windows Server 2008 R2

The RD Connection Broker server communicates with the RD Virtualization Host server when a user requests a connection to a virtual desktop.

Event Details

Product: Windows Operating System
ID: 8451
Source: Microsoft-Windows-TerminalServices-TSV-VmHostAgent
Version: 6.1
Symbolic Name: EVENT_INFO_CONNECTED_TO_SB
Message: Connected to RD Connection Broker. Address=%1

Resolve

This is a normal condition. No further action is required.

Related Management Information

Startup Management

Remote Desktop Services

Related:

Event ID 8450 — Startup Management

Event ID 8450 — Startup Management

Published: January 8, 2010

Applies To: Windows Server 2008 R2

The RD Connection Broker server communicates with the RD Virtualization Host server when a user requests a connection to a virtual desktop.

Event Details

Product: Windows Operating System
ID: 8450
Source: Microsoft-Windows-TerminalServices-TSV-VmHostAgent
Version: 6.1
Symbolic Name: EVENT_INFO_SERVICE_STOP
Message: Remote Desktop Virtualization Host Agent service successfully stopped.

Resolve

This is a normal condition. No further action is required.

Related Management Information

Startup Management

Remote Desktop Services

Related: