Webinar for Product Overview

I need a solution

I found a webinar on Brighttalk that appears to be a launch event for EXISTING users of ITMS and assumes you are familar with the product. (Including acroymns I have no idea wha them mean.)  I am looking for an overview of EXACTLY what the product can do.  Am I overlooking a basic product overview that will explain in simple terms what the product includes and can do?

0

Related:

DAX Index Price Forecast November 14, 2017, Technical Analysis

The German index initially fell during the day on Monday, reaching down to the €13,000 level. That’s an area that has been important in the past, and the bounce from there was to be expected. However, as I look at the short-term charts, it looks as if we are trying to break down below the 13,000 level again. If we do, the market will more than likely go looking towards the €12,900 level underneath, and then perhaps down to the €12,750 level next. This is coinciding with a move higher in the EUR/USD pair, and that of course is likely to be to be a driver of the market in general as it can make the German exports either cheaper or more expensive. As the DAX is full of exporting companies, and makes quite a bit of sense that a more expensive Euro works against it. However, I think that if we can break above the €13,200 level, it’s likely that we will go back to the €13,500 level.

In general, this is a market that I believe goes higher over the longer term, but we may need to pull back somewhat significantly to build up the next leg of momentum to the upside. If we do that, I think that there will be plenty of value to be found underneath for those who are patient enough to take advantage of value in the market that will almost certainly present itself at lower levels. I believe that the uptrend is very much intact if we can stay above the €12,000 level, which is quite a distance below current levels. Longer-term, I believe that the market will go looking towards the €15,000 level, but it’s obviously going to take quite a bit of time to get there.

DAX Video 14.11.17

Related:

  • No Related Posts

What can cause the RawCaptureTimeStamp value be logged out of sequence?

We recently tried to replay some events using the raw capture file and the RawCaptureTimeStamp value but found the problem arrived after the resolution in the RawCaptureTimeStamp value, but during the live capture the problem event arrived before the resolution event.

What could cause this type of behaviour?

Related:

This Week in Comments: October 8th—October 15th, 2017

Nicholas Millner: It is hard to know what capabilities North Korea actually has because they are so isolated from the rest of the world. I think underestimating them is stupid but not as stupid as a “leader” of the “free world” provoking an attack from them so he can show his strength by killing millions of North Koreans. I’m not sure there is much difference between Donald Trump and Kim Jong-un with regards to personality.

Raymond Stewart: This is the correct ethos of Capitalism. Service for pay, not exploiting the experience of a captured audience to sell something that doesn’t belong to you… That is Pimping. And Pimping is what is wrong with Capitalism today, because pimps are beholden to none.

Shawn Choi:The tension of serving two masters is at the heart of many tech & media companies’ challenges. Look at Facebook continually trying to justify accepting Russian money when it was a successful tool of cyber warfare.



Bruce Holland: Perception is everything. We may assign some value to a lump of mater or material that is in fact no different in value to any other lump of material except that we assign value to it as an object and make use of it in what we perceive as reality. A chair is only a configuration of matter but it is given value because we perceive it to be a chair and assign it value. A chair is a human idea that we have externalized into the material world. Lets say your in a sitting position hurling down a road at relative high speed inside a human construct configured from materials extracted from the environment. You see a red light so you stop your vehicle. The light turns green so you manipulate the construct to proceed with its forward motion. Nothing here is really real, its all human perception created by human consciousness. The idea of who you are and the culture you live in, the world you live in and everything that you believe is a creation of your own mind and what you believe the world around you to be like.

Ken Farenick: Every one should have the basic needs met. It would lift humanity to new heights. Think of all the art music and science that would be gained from the time used working just to survive. (Edited slightly – Ed.)



Knut Mikael Haukeland: Who the fuck wants his phone hooked up to his HEART?! “Here’s the new iStroke 7…

Laurie Han-Horton: It’s not because we are trying to compensate. We are just more rational and therefore nice for the sake of being nice to our fellow humans beccause we don’t need a “reward”.

Melisa Kaufmann Penta:I can’t for the life of me remember what book it was, but in high school we read a book, the forward of which said, “God created man, and man being a gentleman, returned the favor.” I always thought that was brilliant.

Related:

  • No Related Posts

An attempt has been made to read too much data. The length {value} is too large to be read. [{value}{value}{value}{value}] (14)

Details
Product: Exchange
Event ID: 3177
Source: MSExchangeMTA
Version: 6.0
Component: Message Transfer Agent
Symbolic Name: MTA03177
Message: An attempt has been made to read too much data. The length {value} is too large to be read. [{value}{value}{value}{value}] (14)
   
User Action
Stop and restart the message transfer agent (MTA) service. If the error persists, run the Mtacheck.exe utility. Stop the MTA service, open a command prompt, and type Mtacheck/v /f c:\mta.txt. If Mtacheck removes objects from a database queue, it places each damaged object in a Db*.dat file in \Exchsrvr\Mtadata\Mtacheck.out. Check your drives and verify that core *.dat files are in the \Exchsrvr\Mtadata directories. The \Exchsrvr\Mtadata directory with *.dat files may be on more than one drive. Contact Microsoft Product Support Services for assistance.

Related:

A fatal internal MTA error occurred. Contact Microsoft Technical Support. An illegal GET from element {name} occurred at offset {value}. [{value}{value}{value}{value}] (16)

Details
Product: Exchange
Event ID: 2051
Source: MSExchangeMTA
Version: 6.0
Component: Message Transfer Agent
Symbolic Name: MTA02051
Message: A fatal internal MTA error occurred. Contact Microsoft Technical Support. An illegal GET from element {name} occurred at offset {value}. [{value}{value}{value}{value}] (16)
   
Explanation
The message transfer agent (MTA) may experience a performance problem when expanding extremely large distribution lists. The problem can also be triggered if the recipient name field being transferred into the MTA is larger than the buffer space available. If a failure occurred during the processing of a message, key routing information for some addresses on the recipients list may not be consistent upon restart, causing the error described above.
   
User Action
Verify that the latest Service Pack is installed for this version of Microsoft Exchange Server. For more information, see Knowledge Base articles Q177328 and Q197398.

Related:

A fatal internal MTA error occurred. Contact Microsoft Technical Support. An illegal PUT to element {name} occurred at offset {value}. [{value}{value}{value}{value}] (16)

Details
Product: Exchange
Event ID: 2050
Source: MSExchangeMTA
Version: 6.0
Component: Message Transfer Agent
Symbolic Name: MTA02050
Message: A fatal internal MTA error occurred. Contact Microsoft Technical Support. An illegal PUT to element {name} occurred at offset {value}. [{value}{value}{value}{value}] (16)
   
Explanation
The message transfer agent (MTA) either encountered an invalid object and cannot process it, or it has database corruption.
   
User Action
Stop and restart the MTA service. If the error persists, run the Mtacheck.exe utility. Stop the MTA service, open a command prompt, and type Mtacheck/v /f c:\mta.txt. If Mtacheck removes objects from a database queue, it places each damaged object in a Db*.dat file in \Exchsrvr\Mtadata\Mtacheck.out. Contact Microsoft Product Support Services for assistance.

Related:

ROSE error, negative RT-transfer confirm received. CB index {index name} Source LPI {value}-{value}-{value} [{value}{value}{value}{value}] (14)

Details
Product: Exchange
Event ID: 1179
Source: MSExchangeMTA
Version: 6.0
Component: Message Transfer Agent
Symbolic Name: MTA01179
Message: ROSE error, negative RT-transfer confirm received. CB index {index name} Source LPI {value}-{value}-{value} [{value}{value}{value}{value}] (14)
   
Explanation
ROSE is the remote operation service element.
   
User Action
Stop and restart the message transfer agent (MTA) service. If the error persists, run the Mtacheck.exe utility. Stop the MTA service, open a command prompt, and type Mtacheck/v /f c:\mta.txt. If Mtacheck removes objects from a database queue, it places each damaged object in a Db*.dat file in \Exchsrvr\Mtadata\Mtacheck.out. Check your drives and verify that core *.dat files are in the \Exchsrvr\Mtadata directories. The \Exchsrvr\Mtadata directory with *.dat files may be on more than one drive. For assistance, contact Microsoft Product Support Services for assistance.

Related: