Event ID 2208 — Trigger Operation

Event ID 2208 — Trigger Operation

Updated: December 3, 2008

Applies To: Windows Server 2008 R2

Message Queuing Triggers is a service that you can use to associate the arrival of each incoming message at a queue with a response that depends on the contents of the message. The response may invoke either a Component Object Model (COM) component or a stand-alone executable program. These components or programs can define business rules that can be invoked in response to such messages, without any additional programming. An issue with triggers operations can, depending on the issue, prevent the invocation of some or all business rules.

Event Details

Product: Windows Operating System
ID: 2208
Source: MSMQ
Version: 6.1
Symbolic Name: MSMQ_TRIGGER_RULE_PARSING_FAILED
Message: The action or a condition parameter for the rule %3 with the ID %4 was not parsed. The rule cannot be evaluated and executed. Error %1: %2

Resolve
Delete and recreate the rule that is specified in the event

Rules must be loaded successfully to operate properly.

To perform this procedure, you must have membership in Administrators, or you must have been delegated the appropriate authority.

To delete and recreate a specified rule:

  1. Open the Computer Management snap-in. To open Computer Management, click Start. In the search box, type compmgmt.msc, and then press ENTER.
  2. In the console tree, expand Computer Management, expand Services and Applications, expand Message Queuing, expand Triggers, expand Rules, and then click Rules.
  3. Select the rule that is specified in the error message, and then delete it.
  4. Right-click the rule, point to New, and then click Rule.
  5. Specify your parameters again.

For more information about creating trigger rules, see Create and attach rules to triggers (http://go.microsoft.com/fwlink/?LinkId=104059).

Verify

Verify that the Message Queuing Triggers service is installed and running.

To perform this procedure, you must have membership in Administrators, or you must have been delegated the appropriate authority.

To verify that the trigger service is installed and running:

  1. Open the Services snap-in. To open Services, click Start. In the search box, type services.msc, and then press ENTER.
  2. Scroll down the list of services to confirm the existence of the Message Queuing Triggers service.
  3. In the Status column, confirm that the Message Queuing Triggers service is Started.

Related Management Information

Trigger Operation

Message Queuing

Related:

Event ID 2207 — Trigger Operation

Event ID 2207 — Trigger Operation

Updated: January 31, 2008

Applies To: Windows Server 2008

Message Queuing Triggers is a service that you can use to associate the arrival of each incoming message at a queue with a response that depends on the contents of the message. The response may invoke either a Component Object Model (COM) component or a stand-alone executable program. These components or programs can define business rules that can be invoked in response to such messages, without any additional programming. An issue with triggers operations can, depending on the issue, prevent the invocation of some or all business rules.

Event Details

Product: Windows Operating System
ID: 2207
Source: MSMQ
Version: 6.0
Symbolic Name: MSMQ_TRIGGER_RULE_HANDLE_CREATION_FAILED
Message: An instance of a rule handler for the rule %3 with the ID %4 was not created. The rule cannot be evaluated and executed. The MSMQTriggerObjects.MSMQRuleHandler class may not be registered, or your System folder does not contain mqtrig.dll. Error %1: %2

Resolve
Confirm the version of Mqtrig.dll

You must have the correct version of the Mqtrig.dll file. First, confirm the version of the Mqtrig.dll file. Then, uninstall and reinstall Message Queuing triggers.

To perform these procedures, you must have membership in Administrators, or you must have been delegated the appropriate authority.

Confirm that the %windir%\system32 folder contains the correct version of the Mqtrig.dll file

To confirm the version of the Mqtrig.dll file:

  1. Open Windows Explorer, and then navigate to the %windir%\System32 folder.
  2. In the System32 folder, right-click mqtrig.dll, and then click Properties.
  3. Click the Version tab, and check the file version. Keep this window open.
  4. Click Start, click Run, type MSInfo32, and then click OK.
  5. Click System Summary.
  6. In the details pane, locate Hardware Abstraction Layer. The version number should match the file version of Mqtrig.dll.
  7. If these versions do not match, try uninstalling and reinstalling the Message Queuing Triggers feature of Message Queuing.

Uninstall and reinstall Message Queuing triggers (Windows Vista)

To uninstall Message Queuing triggers:

  1. Click Start, and then click Control Panel.
  2. In the left pane, click Classic View.
  3. Click Programs and Features.
  4. In the left pane, click Turn Windows features on or off.
  5. In the Windows Features dialog box, expand Microsoft Message Queue (MSMQ) Server Core, and then clear the MSMQ Triggers check box.
  6. Click OK.

To install Message Queuing triggers:

  1. Click Start, and then click Control Panel.
  2. In the left pane, click Classic View.
  3. Click Programs and Features.
  4. In the left pane, click Turn Windows features on or off.
  5. In the Windows Features dialog box, expand Microsoft Message Queue (MSMQ) Server Core, and then select the MSMQ Triggers check box.
  6. Click OK.

Uninstall and reinstall Message Queuing triggers (Windows Server 2008)

To uninstall Message Queuing triggers:

  1. Open Server Manager. To open Server Manager, click Start, point to Administrative Tools, and then click Server Manager.
  2. Start the Remove Features Wizard. To start the Remove Features Wizard, in the Features Summary section, click Remove Features.
  3. Expand Message Queuing, and then expand Message Queuing Services.
  4. Clear the Message Queuing Triggers check box, and then click Next.
  5. Click Remove.

To install Message Queuing triggers:

  1. Open Server Manager. To open Server Manager, click Start, point to Administrative Tools, and then click Server Manager.
  2. Start the Add Features Wizard. To start the Add Features Wizard, in the Features Summary section, click Add Features.
  3. Expand Message Queuing, and then expand Message Queuing Services.
  4. Select the Message Queuing Triggers check box, and then click Next.
  5. Click Install.

Verify

Verify that the Message Queuing Triggers service is installed and running.

To perform this procedure, you must have membership in Administrators, or you must have been delegated the appropriate authority.

To verify that the trigger service is installed and running:

  1. Open the Services snap-in. To open Services, click Start. In the search box, type services.msc, and then press ENTER.
  2. Scroll down the list of services to confirm the existence of the Message Queuing Triggers service.
  3. In the Status column, confirm that the Message Queuing Triggers service is Started.

Related Management Information

Trigger Operation

Message Queuing

Related:

Event ID 2206 — Trigger Operation

Event ID 2206 — Trigger Operation

Updated: December 3, 2008

Applies To: Windows Server 2008 R2

Message Queuing Triggers is a service that you can use to associate the arrival of each incoming message at a queue with a response that depends on the contents of the message. The response may invoke either a Component Object Model (COM) component or a stand-alone executable program. These components or programs can define business rules that can be invoked in response to such messages, without any additional programming. An issue with triggers operations can, depending on the issue, prevent the invocation of some or all business rules.

Event Details

Product: Windows Operating System
ID: 2206
Source: MSMQ
Version: 6.1
Symbolic Name: MSMQ_TRIGGER_OPEN_NOTIFICATION_QUEUE_FAILED
Message: Opening an internal queue needed by the Triggers service failed. Error %1: %2

Resolve
Uninstall and reinstall Message Queuing

The internal triggers notification queue may not have been created successfully. Uninstall and then reinstall the Message Queuing Server to recreate he internal triggers notification queue.

To perform these procedures, you must have membership in Administrators, or you must have been delegated the appropriate authority.

Uninstall and reinstall Message Queuing triggers (Windows Vista)

To uninstall Message Queuing triggers:

  1. Click Start, and then click Control Panel.
  2. In the left pane, click Classic View.
  3. Click Programs and Features.
  4. In the left pane, click Turn Windows features on or off.
  5. In the Windows Features dialog box, expand Microsoft Message Queue (MSMQ) Server Core, and then clear the MSMQ Triggers check box.
  6. Click OK.

To install Message Queuing triggers:

  1. Click Start, and then click Control Panel.
  2. In the left pane, click Classic View.
  3. Click Programs and Features.
  4. In the left pane, click Turn Windows features on or off.
  5. In the Windows Features dialog box, expand Microsoft Message Queue (MSMQ) Server Core, and then select the MSMQ Triggers check box.
  6. Click OK.

Uninstall and reinstall Message Queuing triggers (Windows Server 2008)

To uninstall Message Queuing triggers:

  1. Open Server Manager. To open Server Manager, click Start, point to Administrative Tools, and then click Server Manager.
  2. Start the Remove Features Wizard. In the Features Summary section, click Remove Features.
  3. Expand Message Queuing, and then expand Message Queuing Services.
  4. Clear the Message Queuing Triggers check box, and then click Next.
  5. Click Remove.

To install Message Queuing triggers:

  1. Open Server Manager. To open Server Manager, click Start, point to Administrative Tools, and then click Server Manager.
  2. Start the Add Features Wizard. To start the Add Features Wizard, in the Features Summary section, click Add Features.
  3. Expand Message Queuing, and then expand Message Queuing Services.
  4. Select the Message Queuing Triggers check box, and then click Next.
  5. Click Install.

Verify

Verify that the Message Queuing Triggers service is installed and running.

To perform this procedure, you must have membership in Administrators, or you must have been delegated the appropriate authority.

To verify that the trigger service is installed and running:

  1. Open the Services snap-in. To open Services, click Start. In the search box, type services.msc, and then press ENTER.
  2. Scroll down the list of services to confirm the existence of the Message Queuing Triggers service.
  3. In the Status column, confirm that the Message Queuing Triggers service is Started.

Related Management Information

Trigger Operation

Message Queuing

Related:

Event ID 2205 — Trigger Operation

Event ID 2205 — Trigger Operation

Updated: January 31, 2008

Applies To: Windows Server 2008

Message Queuing Triggers is a service that you can use to associate the arrival of each incoming message at a queue with a response that depends on the contents of the message. The response may invoke either a Component Object Model (COM) component or a stand-alone executable program. These components or programs can define business rules that can be invoked in response to such messages, without any additional programming. An issue with triggers operations can, depending on the issue, prevent the invocation of some or all business rules.

Event Details

Product: Windows Operating System
ID: 2205
Source: MSMQ
Version: 6.0
Symbolic Name: MSMQ_TRIGGER_OPEN_QUEUE_FAILED
Message: Opening the queue %3 for peeking at or retrieving messages failed. The trigger %4 is nonfunctional. Error %1: %2

Resolve
Confirm the permissions of the Message Queuing Triggers service user account

The Network Service user account is the default user account that the Message Queuing Triggers service runs under on computers running Windows Server 2008 and Windows Vista. However, this user account can be changed. Therefore, before you view or change queue permissions, confirm the user account that the Message Queuing Triggers service runs under on the computer that hosts the queue.

To perform these procedures, you must have membership in Administrators, or you must have been delegated the appropriate authority.

Confirm the Message Queuing Triggers service user account and permissions

To confirm the Message Queuing Triggers service user account and permissions:

  1. Open the Services snap-in. To open Services, click Start. In the search box, type services.msc, and then press ENTER.
  2. In the console tree, locate Message Queuing Triggers.
  3. Check the Log On As column to see what user account the service runs under.
  4. Confirm that the user account has Peek Message or Receive Message permissions on the queue.

View or change queue permissions

To view or change queue permissions:

  1. Open the Computer Management snap-in. To open Computer Management, click Start. In the search box, type compmgmt.msc, and then press ENTER.
  2. Expand Services and Applications, and then expand Message Queuing.
  3. Right-click the queue for which you want to view or change permissions, and then click Properties.
  4. Click the Security tab.
  5. If the user account is already listed in Group or user names, select the Allow check box next to the permissions that you want to add.
  6. If the user account is not listed in the Access Control List, click Add to add the user by name or search for the user, and then add permissions as appropriate, as described in step 5.

Verify

Verify that the Message Queuing Triggers service is installed and running.

To perform this procedure, you must have membership in Administrators, or you must have been delegated the appropriate authority.

To verify that the trigger service is installed and running:

  1. Open the Services snap-in. To open Services, click Start. In the search box, type services.msc, and then press ENTER.
  2. Scroll down the list of services to confirm the existence of the Message Queuing Triggers service.
  3. In the Status column, confirm that the Message Queuing Triggers service is Started.

Related Management Information

Trigger Operation

Message Queuing

Related:

Event ID 2203 — Trigger Operation

Event ID 2203 — Trigger Operation

Updated: January 31, 2008

Applies To: Windows Server 2008

Message Queuing Triggers is a service that you can use to associate the arrival of each incoming message at a queue with a response that depends on the contents of the message. The response may invoke either a Component Object Model (COM) component or a stand-alone executable program. These components or programs can define business rules that can be invoked in response to such messages, without any additional programming. An issue with triggers operations can, depending on the issue, prevent the invocation of some or all business rules.

Event Details

Product: Windows Operating System
ID: 2203
Source: MSMQ
Version: 6.0
Symbolic Name: MSMQ_TRIGGER_FAIL_RETREIVE_TRIGGER_INFORMATION
Message: The trigger information cannot be retrieved from the trigger store in registry. At least one trigger is nonfunctional.

Resolve
Uninstall and reinstall Message Queuing triggers

All triggers must be loaded successfully to operate properly.

To perform these procedures, you must have membership in Administrators, or you must have been delegated the appropriate authority.

Uninstall and reinstall Message Queuing triggers (Windows Vista)

To uninstall Message Queuing triggers:

  1. Click Start, and then click Control Panel.
  2. In the left pane, click Classic View.
  3. Click Programs and Features.
  4. In the left pane, click Turn Windows features on or off.
  5. In the Windows Features dialog box, expand Microsoft Message Queue (MSMQ) Server, and then clear the MSMQ Triggers check box.
  6. Click OK.

To install Message Queuing triggers:

  1. Click Start, and then click Control Panel.
  2. In the left pane, click Classic View.
  3. Click Programs and Features.
  4. In the left pane, click Turn Windows features on or off.
  5. In the Windows Features dialog box, expand Microsoft Message Queue (MSMQ) Server, and then select the MSMQ Triggers check box.
  6. Click OK.

Uninstall and reinstall Message Queuing triggers (Windows Server 2008)

To uninstall Message Queuing triggers:

  1. Open Server Manager. To open Server Manager, click Start, point to Administrative Tools, and then click Server Manager.
  2. Start the Remove Features Wizard. In the Features Summary section, click Remove Features.
  3. Expand Message Queuing.
  4. Clear the Message Queuing Triggers check box, and then click Next.
  5. Click Remove.

To install Message Queuing triggers:

  1. Open Server Manager. To open Server Manager, click Start, point to Administrative Tools, and then click Server Manager.
  2. Start the Add Features Wizard. To start the Add Features Wizard, in the Features Summary section, click Add Features.
  3. Expand Message Queuing.
  4. Select the Message Queuing Triggers check box, and then click Next.
  5. Clickt Install.

Verify

Verify that the Message Queuing Triggers service is installed and running.

To perform this procedure, you must have membership in Administrators, or you must have been delegated the appropriate authority.

To verify that the trigger service is installed and running:

  1. Open the Services snap-in. To open Services, click Start. In the search box, type services.msc, and then press ENTER.
  2. Scroll down the list of services to confirm the existence of the Message Queuing Triggers service.
  3. In the Status column, confirm that the Message Queuing Triggers service is Started.

Related Management Information

Trigger Operation

Message Queuing

Related:

Event ID 2201 — Trigger Initialization

Event ID 2201 — Trigger Initialization

Updated: January 31, 2008

Applies To: Windows Server 2008

Message Queuing Triggers is a service that you can use to associate the arrival of each incoming message at a queue with a response that depends on the contents of the message. The response may invoke either a Component Object Model (COM) component or a stand-alone executable program. These components or programs can define business rules that can be invoked in response to such messages, without any additional programming. If trigger initialization fails and the trigger service is not available, any trigger-dependent message processing logic will not be carried out.

Event Details

Product: Windows Operating System
ID: 2201
Source: MSMQ
Version: 6.0
Symbolic Name: MSMQ_TRIGGER_INIT_FAILED
Message: Message Queuing Triggers initialization failed. Error %1: %2

Resolve
Confirm registry key and permissions

Message Queuing needs full permission on its registry node. The Message Queuing Triggers service will fail to start if Message Queuing is not able to read certain information from the registry.

You must run the registry editor as an administrator, which is the only way to edit registry keys with the user interface (UI). By default, local administrators have full permissions on the entire registry.

To confirm the registry key and permissions:

Caution: Incorrectly editing the registry might severely damage your system. Before making changes to the registry, you should back up any valued data.

  1. Open Registry Editor. To open Registry Editor, click Start. In the search box, type regedit, and then press ENTER.
  2. Expand HKEY_LOCAL_MACHINE, expand SOFTWARE, expand Microsoft, and then expand MSMQ.
  3. Confirm that the Triggers registry key is available and that Message Queuing can read the registry values.
  4. Right-click the MSMQ Registry node (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSMQ), and then click Permissions.
  5. In Group or user names, confirm that MSMQ is included. If it is not included, click Add.
  6. In Group or user names, click MSMQ, and then click Advanced.
  7. In Permission entries, click MSMQ, and then click Edit.
  8. For Full Control, confirm that MSMQ has the Allow check box selected. This action selects all the other Allow check boxes.
  9. In the Apply to list, confirm that This key and subkeys is selected.

If you continue to receive this error, note any details in the event message, and then contact Microsoft Customer Service and Support (CSS). For information about how to contact CSS, see Enterprise Support http://go.microsoft.com/fwlink/?LinkId=52267).

Verify

Verify that the Message Queuing Triggers service is installed and running.

To perform this procedure, you must have membership in Administrators, or you must have been delegated the appropriate authority.

To verify that the Message Queuing Triggers service is installed and running:

  1. Open the Services snap-in. To open Services, click Start. In the search box, type services.msc, and then press ENTER.
  2. Scroll down the list of services to confirm the presence of the Message Queuing Triggers service.
  3. In the Status column, confirm that the Message Queuing Triggers service is Started.

Related Management Information

Trigger Initialization

Message Queuing

Related:

Event ID 2198 — Message Queuing Connectivity

Event ID 2198 — Message Queuing Connectivity

Updated: December 3, 2008

Applies To: Windows Server 2008 R2

Message Queuing relies on network connectivity for much of its functionality. If network connectivity is lost or compromised, messages may not be sent or delivered.

Event Details

Product: Windows Operating System
ID: 2198
Source: MSMQ
Version: 6.1
Symbolic Name: EVENT_WARN_IPv4_NOT_SUPPORTED
Message: Message Queuing failed to listen on the IPv4 protocol. Messages will not be accepted on IPv4. Error %1: %2

Resolve
Enable IPv4

Message Queuing is not able to listen to messages on IP version 4 (IPv4) because of some issue. IPv4 may not be enabled, or your hardware or software may not support it. Check with your domain administrator for more details.

If IPv4 is disabled, you can enable it yourself by using the following procedure.

To enable IPv4:

  1. Open Control Panel. Click Start, and then click Control Panel.
  2. Double-click Network and Sharing Center.
  3. In the Tasks section, click Manage Network Connections.
  4. In Network Connections, right-click the local area network (LAN) icon or your appropriate network controller, and then click Properties.
  5. On the Networking tab, make sure that the Internet Protocol Version 4 (TCP/IPv4) check box is selected.

Verify

Confirm that the MSMQ Service is installed and running.

To perform this procedure, you must have membership in Administrators, or you must have been delegated the appropriate authority.

To confirm that the MSMQ Service is installed and running:

  1. Open the Services snap-in. To open Services, click Start. In the search box, type services.msc, and then press ENTER.
  2. Locate the Message Queuing service, and then confirm that the value in the Status column is Started.

Verify that the computer has connectivity to the network.

Related Management Information

Message Queuing Connectivity

Message Queuing

Related:

Event ID 2199 — Message Queuing Connectivity

Event ID 2199 — Message Queuing Connectivity

Updated: January 31, 2008

Applies To: Windows Server 2008

Message Queuing relies on network connectivity for much of its functionality. If network connectivity is lost or compromised, messages may not be sent or delivered.

Event Details

Product: Windows Operating System
ID: 2199
Source: MSMQ
Version: 6.0
Symbolic Name: EVENT_ERROR_IP_NOT_SUPPORTED
Message: Message Queuing Service failed to listen on both IPv4 and IPv6 protocol. Messages will not be accepted from the network through TCP/IP protocols. Messages addressed to this machine using TCP/IP protocols will not arrive but will accumulate in sender’s outgoing queues.

Resolve
Repair TCP/IP problems

The TCP/IP communication protocols are not functioning as expected. Contact your domain administrator to resolve problems with TCP/IP, and then restart the computer.

Verify

Confirm that the MSMQ Service is installed and running.

To perform this procedure, you must have membership in Administrators, or you must have been delegated the appropriate authority.

To confirm that the MSMQ Service is installed and running:

  1. Open the Services snap-in. To open Services, click Start. In the search box, type services.msc, and then press ENTER.
  2. Locate the Message Queuing service, and then confirm that the value in the Status column is Started.

Verify that the computer has connectivity to the network.

Related Management Information

Message Queuing Connectivity

Message Queuing

Related:

Event ID 2197 — Message Queuing Connectivity

Event ID 2197 — Message Queuing Connectivity

Updated: January 31, 2008

Applies To: Windows Server 2008

Message Queuing relies on network connectivity for much of its functionality. If network connectivity is lost or compromised, messages may not be sent or delivered.

Event Details

Product: Windows Operating System
ID: 2197
Source: MSMQ
Version: 6.0
Symbolic Name: EVENT_WARN_IPv6_NOT_SUPPORTED
Message: Message Queuing failed to listen on the IPv6 protocol. Messages will not be accepted on IPv6. Error %1: %2

Resolve
Install the IPv6 Protocol

Message Queuing is not able to listen to messages on IP version 6 (IPv6) because the protocol may not be supported on this computer. Contact your domain administrator to find out if IPv6 can be installed on this computer, because your hardware or software may not support IPv6.

To enable the protocol yourself or to determine whether it is supported:

  1. Open Control Panel. To open Control Panel, click Start, and then click Control Panel.
  2. Double-click Network and Sharing Center.
  3. In the Tasks section, click Manage Network Connections.
  4. In Network Connections, right-click the local area network (LAN) icon or your appropriate network controller, and then click Properties.
  5. On the Networking tab, make sure that the Internet Protocol Version 6 (TCP/IPv6) check box is selected.

Verify

Confirm that the MSMQ Service is installed and running.

To perform this procedure, you must have membership in Administrators, or you must have been delegated the appropriate authority.

To confirm that the MSMQ Service is installed and running:

  1. Open the Services snap-in. To open Services, click Start. In the search box, type services.msc, and then press ENTER.
  2. Locate the Message Queuing service, and then confirm that the value in the Status column is Started.

Verify that the computer has connectivity to the network.

Related Management Information

Message Queuing Connectivity

Message Queuing

Related:

Event ID 2195 — Message Queuing Operation

Event ID 2195 — Message Queuing Operation

Updated: January 31, 2008

Applies To: Windows Server 2008

Message Queuing operation provides message authentication, message encryption, dead-letter queues, security settings, and other basic features. If Message Queuing has problems with any of these features, proper Message Queuing operation may suffer.

Event Details

Product: Windows Operating System
ID: 2195
Source: MSMQ
Version: 6.0
Symbolic Name: EVENT_WARN_UNAUTHENTICATED_MESSAGE_REJECTED
Message: Message Queuing could not authenticate a message sent to queue %1. The message was rejected because the queue only accepts authenticated messages. A negative arrival acknowledgement will be sent if requested by the sender.

This event is logged at most once per %2 seconds. To change this setting, set \HKLM\Software\Microsoft\MSMQ\Parameters\Event2195 registry value to desired time in seconds.

Resolve
Confirm that messages are authenticated and that the sending computer has a valid certificate

Because the queue accepts only authenticated messages, messages that are sent to the queue must be authenticated and signed with a certificate, which is registered in Active Directory Domain Services (AD DS).

To perform this procedure, you must have membership in Administrators, or you must have been delegated the appropriate authority.

To confirm the presence of user certificates:

  1. On any computer in the domain, click Start. In the search box, type compmgmt.msc, and then press ENTER.
  2. Enter administrator credentials, if you are prompted, and then continue through the User Access Control messages.
  3. Navigate to the Message Queuing console tree. Click Services and Applications, and then click Message Queuing.
  4. Right-click Message Queuing, and then click Properties.
  5. Click the User Certificate tab.
  6. Click View.
  7. Determine whether the computer sending the unauthenticated messages is in the Personal Certificates list.
  8. If the computer is not in the list, a certificate was not registered.
  9. You can fix this by performing steps 1 through 7 on the computers on which the certificate was not registered. For step 6, click Register instead of View.

For more information about signing messages, see Message Authentication (http://go.microsoft.com/fwlink/?LinkID=104732).

Verify

Verify that the MSMQ Service is installed and running.

To perform this procedure, you must have membership in Administrators, or you must have been delegated the appropriate authority.

To verify that the MSMQ Service is installed and running:

  1. Open the Services snap-in. To open Services, click Start. In the search box, type services.msc, and then press ENTER.
  2. Locate the Message Queuing service, and confirm that the value in the Status column is Started.

Related Management Information

Message Queuing Operation

Message Queuing

Related: